Buyer's Guide: Laboratory Design & Build

March 2021 - Vol.10 No. 3 - Page #15
Category: Laboratory Design and Relocation Services

TransLogic Pneumatic Tube Systems from Swisslog Healthcare

TransLogic pneumatic tube systems (PTS) from Swisslog Healthcare can enable lab professionals to spend their time operating at the top of their licensing scope instead of transporting samples. The system transports specimens to the lab quickly and reliably, allowing for substantial chain-of-custody control through the fully integrated technology. Sample batching can create bottlenecks that negatively affect turnaround times leading to further delays, so the Xpress technology of TransLogic PTS is designed to help improve the speed and efficiency of lab workflow, leading to faster resulting and time-to-treat.

  • From Swisslog Healthcare

Laboratory Design with Modular Casework from R.C. Smith/MMI

R.C. Smith/MMI’s laboratory space planning, modular casework, and professional installation is designed to support an efficient, regulatory compliant, and functional lab. Offering extensive expertise in the areas of laboratory space planning and casework solutions, R.C. Smith’s design experts create a well-organized and productive work environment that meets the facility’s specific requirements. Drawing upon thousands of completed projects allows the designers to offer the best solution possible, utilizing modular casework that combines product adaptability with the efficient use of space, healthy ergonomics, and pleasing aesthetics.

  • From R.C. Smith/MMI Systems

Polypropylene Fume Hood and Casework from NuAire

NuAire’s modular cabinetry and fume hoods are manufactured using stress-relieved, fully seam-welded, white polypropylene for demanding laboratory applications. Walls and floors are reinforced where required to maintain structural integrity; doors are readily removable and hinges are easily replaceable. All FumeGard conventional, bypass, and vertical laminar flow fume hoods can be built in conjunction with all polypropylene cabinetry.

  • From NuAire

Purair from Air Science USA

Air Science Purair ductless fume hoods combine high energy efficiency with low environmental impact. Ductless technology reduces the expense of HVAC reconditioning as filtered air is safely recirculated into the laboratory. The ductless fume hoods can be installed anywhere without the added infrastructure expense of ductwork. Available in seven standard sizes, combined with the ability to modify models based on facility needs, the system is designed for use in existing laboratories and new builds.

Purair Advanced models are available in either metal or polypropylene construction and feature large internal dimensions that are ideal for high-volume applications. The hoods are designed to protect the user and the environment from hazardous vapors generated on the work surface. When combined with the optional HEPA/ULPA safety filter, they also protect from particulates.

  • From Air Science USA

Purifier Logic+ Biosafety Cabinet from Labconco Corporation

The Labconco Corporation’s Purifier Logic+ Class II, Type A2 biosafety cabinet is designed for laboratories handling hazardous particles, such as agents that require Biosafety Level 1, 2, or 3 containment. Purifier Logic+ BSCs provide personal, product, and environmental protection, including from COVID-19 samples. The design of all Logic+ BSCs centers around the MyLogic operating system, which communicates status updates on an LCD screen located at eye level within the BSC. Ergonomic design components, such as a sloped sash and an inlet grill armrest, are combined with a quiet, energy efficiency blower to maximize user comfort during extended periods of work. Logic+ BSCs typically recirculate HEPA filtered air directly into the laboratory; however, nuisance odors or light-duty chemicals can be vented into an exhaust system through an optional canopy connection.

  • From Labconco Corporation

Laboratory Planning and Design from EwingCole

EwingCole is a fully integrated architecture, engineering, interior design, and planning firm, with more than 460 professionals in Baltimore, Charlotte, Irvine, New York, Raleigh, Philadelphia, Pittsburgh, and San Diego. In the past decade, EwingCole has planned and designed over 12 million square feet of laboratory space. The firm’s projects integrate typical laboratory instrumentation and wet laboratory processing areas with high-end, specialized instrumentation support. The design team focuses on optimizing the laboratory’s throughput and effectiveness, while also accommodating future technology changes. Working closely with laboratory scientists and instrumentation and equipment manufacturers to understand the technologies employed, EwingCole develops laboratory systems that work to accommodate maximum flexibility.

  • From EwingCole
 

Epoxy Worksurfaces and Sinks from Durcon

Durcon’s epoxy worksurfaces and sinks provide a complete system of durable, heat- and chemical-resistant laboratory products creating consistency throughout the laboratory environment. The high-density epoxy worksurfaces are molded as one solid piece of nonporous material, eliminating surface absorption, delamination, and swelling. Created with the goal of ensuring longevity, epoxy worksurfaces are resistant to harsh chemicals, heat, fire, staining, pitting, and marring, and have a Class A fire rating. Available in conjunction with these epoxy worksurfaces, Durcon’s Epoxy DropIn sinks are likewise durable and do not require undermount support. With the DropIn sink installation method, the cutout is sealed, eliminating the overhang that can become a collection point for residual chemicals and bacteria.

  • From Durcon, A Wilsonart Company
 

LabGard NU-543 Biosafety Cabinet from NuAire

NuAire’s LabGard NU-543 Class II, Type A2 biosafety cabinet (BSC) is a benchtop unit, available with telescoping or motorized auto-rising base stand options. The NU-543 utilizes a single, ultra-high efficiency motor to reduce energy consumption and features large HEPA filters to extend filter lifespan. The BSC utilizes the FlowGard control system with a single airflow sensor, monitoring airflow in real time. NSF/ANSI 49 and EN12469 certified, NU-543 provides ISO Class 5 air protection and comes standard with a prop-up work tray for easy cleanability of the sidewall cord pass-through ports (NSF approved). All NuAire BSCs are fully customizable. Available options include armrests and moveable elbow rests, adjustable footrest, ultraviolet light, exhaust canopy with available flex duct kit options, and an Ergotron Arm for a monitor and keyboard/mouse.

  • From NuAire

Modular Lab Furniture Systems from Hemco

Hemco’s Modular Lab UniLine furniture offerings include base cabinets, wall cabinets, countertops, sinks, fixtures, base tables, mobile work stations, specialty storage cabinets, and peg boards. The UniLine casework groupings are designed to incorporate several casework styles into one package. The casework is tested independently to be SEFA 8 compliant. Complete turnkey installation is an additional service option to help ensure quality standards.

  • From Hemco

Purifier Filtered PCR Enclosure from Labconco Corporation

Labconco Corporation’s Purifier Filtered PCR enclosures provide a sterile, particulate-free environment (ISO 5) to protect sensitive work from outside contamination. These specialized vertical clean benches provide a controlled environment in which to perform PCR sample preparations minimizing cross contamination. The enclosures include a UV light with timed exposure (user selectable increments) to deactivate DNA and RNA contaminants. Purifier PCR enclosures are constructed of durable metal and glass components for easy decontamination and longevity. The enclosures are available in 2- to 4-foot widths, with epoxy or stainless steel work surfaces, and optional base stands and cabinets.

  • From Labconco Corporation

Login

Like what you've read? Please log in or create a free account to enjoy more of what www.medlabmag.com has to offer.

Current Issue